Benchmark AMS4A040, Руководство по эксплуатации и обслуживанию

Страница: 17 / 39

AMS4A040 PANEL USER MANUAL Rev H Nov 2006 Page 17 of 39
Procedure: Use +/- switch to set the CCL offset depth
Indication: CCL will be displayed on the DEPTH display and the value
will be displayed on the TENSION display as it is being set.
4.8 DEPTH ADJUST (Shim)
Functionality: The shim amount selected will automatically be added or
subtracted from the depth input.
Procedure: Use +/- switch to set the shim setting.
Indication: DP-ADJ will be displayed on the DEPTH display and the
value will be displayed on the TENSION display as it is being
set. The values are feet / thousand.
Factory default value is 0.
4.9 ENCODER
Functionality: The value selected will automatically be used as the encoder
input pulses per revolution (PPR) setting.
Procedure: Use +/- switch to set the ENCODER Pulse Per Revolution
setting.
Indication: ENCODR will be displayed on the DEPTH display and the
value will be displayed on the TENSION display.
Selection: 1200 (600 ppf or 1968 ppm)
780 (390 ppf or 1280 ppm)
512 (256 ppf or 1680 ppm)
Default value is 1200.
4.10 ENCODER DIRECTION
Functionality: The value selected will toggle the encoder direction between
UP and Down.
Procedure: Use +/- switch to set the ENCODER direction setting.
Indication: ENCDIR will be displayed on the DEPTH display and either
UP or DN value will be displayed on the TENSION display.
Default value is UP.