Benchmark AMS4A040, Руководство по эксплуатации и обслуживанию

Страница: 9 / 39

AMS4A040 PANEL USER MANUAL Rev H Nov 2006 Page 9 of 39
S-SLAM
Other
Default value is 7-16
If OTHER is selected, two additional options are available.
LCA and WHLCIR.
LCA (Load Cell Angle). This setting allows for the use of a
sheave mounted load cell. The angle of the cable exiting the
sheave should be entered. Typically for a load cell mounted
above the top sheave the LCA would be 0. For a load cell
mounted to the bottom sheave the LCA would be 90 (90
degrees). Default value is 0.
WHLCIR (Wheel Circumference). This value is set to the
circumference of the measuring wheel to ensure the depth is
measured correctly. Default value is 2.0 ft.
3.2 TEN ALARM
Functionality: When preset tension value is reached, alarm sounds and
tension display flashes value
Procedure: Use +/- switch to set the tension alarm setting.
Indication: TALARM will be displayed on the DEPTH display and the
value will be displayed on the TENSION display as it is being
set.
Selection: Each cable size will have a corresponding Tension Alarm
setting. Only the setting for the cable size selected (see
menu option 1) can be adjusted.
Default
Values
7-32 1500
9-32 2400
5-16 2400
3-8 2400
7-16 2400
15-32 2400
SLAM 2400
S-SLAM 2400