18
5240-552
Hydraulic Line Connection
Hold Hydraulic Hoses above the level
of the hydraulic tank to prevent fluid
leakage and remove the end caps.
Apply Teflon tape or pipe sealant onto
the hose fitting threads.
Install the ends of the two Hydraulic
Hoses to the Valve (as shown in detail
drawing). Securely tighten the fitting
connections using 22mm and 24mm
wrenches.
Remove tank cap and install the vent cap.
Log Catcher Installation
Rotate Beam & Cylinder down from
upright position and lock in place with
the release pin.
Install the Log Catcher Assembly with
Hex Bolts, Flat Washer, Lock Washer,
Hex Nut and Button Screw in 2 plac-
es. Tighten hex nuts securely with a
17mm socket wrench and tighten but-
ton screws with 6mm hex key wrench.
Содержание 65926
Страница 20: ...19 25 TON LOG SPLITTER OWNER S MANUAL FEATURES AND CONTROLS...
Страница 31: ...30 5240 552 PARTS DIAGRAM...