background image

6.)  “ENTER PASSCODE”

 

To be able to change programming parameters or reset the counters, a 4-digit 
passcode must be entered. The default passcode is 0000. To enter the passcode, 
Depress Button 1 to change the digit from 0 to 9, then press Button 2 to move to the 
next digit. After all digits have been entered correctly, depressing button 2 will 
Display the first programming option, “CHANGE PASSCODE?”.  

7.) “CHANGE PASSCODE?” 

Depressing Button 1 will allow for changing the passcode. Depressing Button 2 will 
move to “DISPLAY CONTRAST”. 

IMPORTANT!!! ONCE THE PASSCODE IS CHANGED, THE DEFAULT OF 
0000 WILL NO LONGER WORK! BE SURE TO SAVE THE PASSCODE IN 
A SAFE PLACE! 

Entering the new passcode is accomplished in the same way that entering the 
passcode is done, as explained in 

6.) 

 8.)

 

DISPLAY CONTRAST 

This option sets the contrast for the LCD Display. Depress and hold Button 1 until the 
desired contrast is reached, then release Button 1. Depressing Button 2 will move to 
the next option, “PLAY MODE VOLUME”. 

9.) PLAY MODE VOLUME 

This option sets the speaker volume during game play. When this option is entered, 
the game’s background music will play continuously. Depressing Button 1 will 
increase/decrease the volume. As long as Button 1 is depressed, the volume will 
increase until the maximum is reached, then decrease until the volume is off. Depress 
and hold Button 1 until the desired volume is reached. Releasing Button 1 at any time 
and then depressing it again will change the direction of the volume adjustment. 
Depressing Button 2 will display the next option, “ATTRACTION MODE 
VOLUME”. 

10.) ATTRACTION MODE VOLUME 

This option sets the speaker volume during Attraction Mode. When this option is 
entered, the game’s background music will play continuously. Depressing Button 1 
will increase/decrease the volume. As long as Button 1 is depressed, the volume will 
increase until the maximum is reached, then decrease until the volume is off. Depress 
and hold Button 1 until the desired volume is reached. Releasing Button 1 at any time 
and then depressing it again will change the direction of the volume adjustment. 
Depressing Button 2 will display the next option, “JACKPOT MODE VOLUME”. 

12

Содержание Fire & Ice X-Treme




















Отзывы: