“
Rethinking sensing technology
”
Document version : 2.8
BeanGateway® User Manual
Document type : User Manual
Please consider the environment before printing this document.
Page : 57 / 75
Diagnostic cycle
You can set the BeanGateway® diagnostic cycle
(Battery status).
Profile erasing/
Back to default/
Network button
This field is used for BeanDevice® profile erasing or
factor settings restoration.
Network profile deletion
: BeanDevice® profiles are
deleted from the BeanGateway® Database
&
RF
parameters are restored to the factory settings (TX
power, Authorized RF channels, RF Channel).
Full:
BeanDevice® profiles are deleted
&
RF
parameters are restored to the factory settings (TX
power, Authorized RF channels, RF Channel)
&
LAN/Ethernet parameters are restored to the factory
settings
Click on
Delete
Network enable/disable
: You can enable and disable
the “Network” button on your BeanGateway from
BeanScape with “Nwk disable/enable”. This function
is useful when you want to eliminate the risk of
losing your BeanDevices profiles by accidentally
pushing the Network button on the BeanGateway.
Beep sound
configuration
Only available on the BeanGateway Indoor
Configure the Buzzer alarm :
✓
Disabled
: Buzzer is disabled
✓
Battery alarm event
: The BeanGateway® emits a
beep sound every 2 seconds if the external power
supply is disconnected
✓
Localize
: A beep sound allows to localize your
BeanGateway®
Delete Device
Remove a BeanDevice® from your network
You can use “Delete Device” function in order to
remove a BeanDevice from the list.
