“
Rethinking sensing technology
”
Document version : 2.8
BeanGateway® User Manual
Document type : User Manual
Please consider the environment before printing this document.
Page : 24 / 75
To ensure an excellent seal of the BeanGateway® casing, please make sure that the following
conditions are met:
✓
During transportation, cable connections and locknuts could loosen , make sure they are tight
✓
Do not overtighten or exert force on your RJ45 cable or power cable
✓
If the external power supply is not used, make sure the power supply cap is present on the M8
socket;
✓
Make sure that all the N-Type antennas are tightly screwed;
✓
The external switch-mode power supply is not watertight;
The BeanGateway® outdoor is delivered with a 2-meters length LAN/RJ45 cable. If the cable
length is not enough for your application, use a RJ45 coupler (not provided with our material).
6.3.3 Led Description
Action
WSN Activity
LED
LAN Network activity LED with
DataLogging on Micro-SD®
activtaed
GSM/GPRS Activity
LED
Results / Impact
BeanGateway®
Power ON
LED is flashing
green
LED is fixed red and turn off by an
interval of 15s and then turns
back
LED is flashing green
The BeanGateway® is initialized and
set up the mapping of its wireless
network sensors
Press the RESET
button
LED is flashing
green
LED is fixed green and it turn off
by an interval of 15s and then
turns back
LED is flashing green
The coordinator is initialized (same
action as above)
Data’s reception
from wireless
sensor network
LED is flashing
green
fixed green
LED is flashing green
Memorization, organization and data
transmission to the network
supervisor control monitor
Reception of
configuration
information from
the BeanScape®
LED is flashing
green
fixed green
LED is flashing green
Transmission of configuration
information to the WSN
DataLogging on the
Micro-SD
/
LED is flashing RED
/
/
