“
Rethinking sensing technology
”
Document version : 2.8
BeanGateway® User Manual
Document type : User Manual
Please consider the environment before printing this document.
Page : 46 / 75
DHCP Enabled
: Check this case if you want to enable the DHCP. For further information about DHCP read
the
Technical Note
“
BeanGateway® management on your Local Area Network infrastructure”.
If DHCP is not activated, the user must configure the Beangateway® IP parameters:
o
IP Address:
BeanGateway IP Address. The
BeanGateway® IP address should have the following
form:
“X.Y.Z.B“. With A, B, X, Y and Z numbers between 0 and 255
o
Subnet Network mask:
The subnet mask is set to "255.255.255.0" by default
o
Gateway IP Address:
Subnet network mask
DNS Enabled
: Check this case if you want to enable the DNS. For further information about DNS read the
Technical Note
“
BeanGateway® management on your Local Area Network infrastructure”.
The gateway IP address subnet is the default "X.Y.Z.1"
Port
: By default the communication port used is "5313". This port is generally free, if not choose another
Socket Port.
For further information, please read the following technical note
–
TN_RF_009
–
« BeanGateway®
management on LAN infrastructure »
9.4 START THE BEANSCAPE®
Start the server by clicking the Start button
Click here
