11
Installation
–
Assembled Base
200820
Note: The Assembled Base is a two adult person lift.
Once the
opening
has been made, lift the unpacked
Assembled Base
into position and centralize on the
opening in the wall.
Before proceeding further, ensure the
Assembled
Base
is
LEVEL
in all planes.
See Diagram 12.
Diagram 12
Diagram 13
Diagram 15
Once in position, mark up the bottom edge of the
Angle Brackets,
pre-installed on the inside of the
Assembled Base
, onto the wall.
See Diagram 13.
Diagram 14
Lift the
Assembled Base
away from the wall and
proceed with marking the
2 x Wall Brackets
fixing
positions on the wall.
(Brackets bagged with the
surround).
Set the bottom edge of the
2 x Wall Brackets
30mm
down from the previously drawn line.
Once marked, drill the fixing positions. Depending on
the wall medium, it may be necessary to plug the
drilled holes.
See Page 14 ‘Important Note’.
Finally screw and secure the
2 x Wall Brackets
to the
wall using suitable screws.
See Page 14 ‘Important
Note’.
See Diagram 14.
Once the
2 x Wall Brackets
are fixed to the wall - lift
the
Assembled Base
back to the wall, ensuring the
Angle Bracket
and
Wall Bracket
, engage correctly.
Before proceeding further, ensure the
Assembled
Base
is
LEVEL
in all planes.
