7
200811_1
Operation Instructions
continued…
Setting The Day and Time
The following can only be set using the remote control.
Press the power button to turn the unit on.
Press and hold the time setting button for two seconds to display the time
and day (no numbers are shown as time has not been set) See Fig 9.
Press the time setting button and the day setting will start to flash. See Fig 10.
Adjust the day setting using the Temp + Temp
–
buttons.
Press the time setting button and the hour setting will start to flash, adjust the
hour using the Temp + and Temp- buttons.
Press the time setting button and the minute setting will start to flash, adjust
the minute setting using the Temp + and Temp
–
buttons
Press the time setting button to set the time and exit the day / time setup.
Fig 9.
Fig 10.
Setting The Weekly Timer
This timer allows for two ON / OFF periods (M1 / M2) for each day of the week.
The timer can be set using the following procedure:
Press the power button to turn the unit on.
Press and hold the timer mode button for two seconds to enter the timer
settings. The settings for the first ON / OFF period (M1) for Monday will be
shown with the first ON time and hour setting flashing. See Fig 11.
Adjust the hour setting using the Temp + and Temp
–
buttons, press the time
setting button to select the minute, adjust this setting using the Temp + and
Temp
–
buttons.
Press the time setting button and the display will move to the first OFF time
setting. See Fig 12.
Repeat the above steps to set the first OFF time.
Press the time setting button and the display will move to the second ON / OFF
period (M2), with the second ON time setting displayed. See Fig 13.
Repeat the above steps to set the second ON / OFF period
Press the time setting button and the display will move onto the first ON / OFF
period (M1) for Tuesday with the first ON time setting displayed.
Repeat the above steps for Tuesday’s settings and repeat process for
Wednesday to Sunday settings.
Having confirmed Sunday’s settings exit the timer setting, this can be done by
not using the remote for 10 seconds and the unit will then default into normal
operating mode. To activate the timer settings press the timer mode button
until the timer symbol is displayed on the screen. See Fig 14.
Fig 11.
Fig 12.
Fig 13.
Fig 14.
Note
: The time and day must be set before the timer mode can be activated. The unit can still be operated
normally when in timer mode using the heater function
Note
: If the power to the unit is lost then the time / day and weekly timer settings will have to be reprogrammed.
