200781_1
FIRE INSTALLATION Model Number 1584 Ember MKII
Before You Start
Required for installation: 4 off screws and plugs suitable for the wall media (Not supplied)
The surround / appliance must be positioned so that the plug (fused spur) is accessible. Only when you
are certain that you have completed the installation should you plug in and switch on at the wall socket.
This appliance should not be installed into an open / existing fireplace without the opening being
professionally blanked off to reduce the risk of a back draught, which could cause the safety cut-out to
operate.
Check that the supply voltage details on the appliance are in accordance with your electrical supply.
Your appliance is fitted with a plug incorporating a 13 Amp fuse. In the event of replacing the fuse in
the plug supplied, a 13 Amp fuse approved by ASTA to BS 1362 must be used. Before switching on,
please read the following fire installation instructions.
In the event of any problems please contact:
Be-Modern Helpline on 0191 430-0901
.
7
Ember Fixing Points
Diagram 3
