200781_1
15
Adaptive Start Control
R26 According to room temperature and set temperature, the heater
will automatically come on in time to heat the room to the set
temperature at the set time. For example, if your timer is set to start at
18:00 and temperature is set to 23°C, the fire will come on at 17:30 to
ensure the room is 23°C at 18:00.
Window Open Detection
R27 When the transmitter detects a rapid drop in room temperature, it
will be judged as a window open, the warning icon will be displayed
and the heating will be turned off automatically.
R28 After the indoor temperature has risen or a manual override of
the warning (by operating remote control) has been done, the fire will
return to normal working state.
Set up the communication between the remote and the appliance
R29 The following operations should be carried out before
programming, when changing to a new remote or in the event the
appliance cannot be controlled by the remote:
• Hold the reset button on the appliance for 3 seconds (pen point may
be needed) until you hear 3 short beeps from the unit, release the
button. (See page 9 for button location)
• Press the
button on the remote, the programming is finished when
you hear 1 long beep from the appliance
R30 Resetting the code for remote control is
necessary if the appliance operates incorrectly or the
remote control does not operate correctly.
• Open the back cover of the remote control.
• Press the Reset button on the remote control.
• Follow the steps R29
