200686_4
Page 4
Using the fire as a portable appliance
Should you decide to use the appliance in a different location simply lift the fire vertically and towards to unhook from the keyhole
brackets. Lift appliance away from the suite. The bracket / stands supplied with this appliance are to be fixed using the existing
screws on the appliance and are to prevent the appliance falling over whilst in use.
Loosen the screws a couple of turns enough to enable you to slide the brackets into position. Once in position retighten the
screws (see below). The appliance is now ready for use in another room / location
*IMPORTANT* This appliance must have the feet / brackets fitted to be used as a portable appliance. These feet /
brackets are to prevent the fire from tipping over.
Maintenance:
WARNING
: -
Before undertaking any maintenance or cleaning, ensure appliance is disconnected from mains supply.
Only competent persons should service / repair appliance
.
WARNING: There are no internal user serviceable parts, i.e. bulbs in this product. Under no circumstance should
access be gained
to the internal parts other than by a suitably qualified person.
Please note: - If the supply cord on this appliance is damaged it must be replaced by the manufacturer, Authorised
Service Agent, or a qualified person to avoid hazard.
Care:
Warning: Before undertaking any maintenance or cleaning disconnect appliance from main supply. Only competent persons
should service / repair appliances.
Filter – Located underneath the stove
Dust build-up can inhibit efficient performance of the fan and lead to the safety cut-out operating. Periodic cleaning of the filter
will ensure correct operation of the heater unit.
To remove the filter pull the filter unit towards the front of the fire, cleaning can be done with a vacuum cleaner and a suitable
attachment
Fig. 4.
Fig 4.
General Suite Care – not glass
To maintain the appearance of you new suite we recommend that it is dusted using a lint free cloth. NEVER use any form of
abrasives or a DAMP cloth on the fire or the surround.
The area around the fire should be kept free of any materials such as lint or house dust (i.e. animal hair/ carpet fibres) that could
be drawn into the internal workings of the appliance and hence affect the performance. We recommend that you clean around
the fan grille housing at regular intervals. This can be done using standard vacuum cleaner and suitable attachment.
Glass Care
Periodically it may be necessary to remove the door for cleaning. This is achieved by first disconnecting the appliance from the
mains supply, then remove the screw directly underneath the door, this will allow the door to be removed by pulling the door
initially vertically and the towards you, this will release the door from the keyhole slots used for location.
With the door removed the inside of the glass panel can be cleaned, when cleaning glass panels use a slightly damp cloth. Do
not use washing powders or any other substance containing abrasives since these substances scratch glass.
