LR1100 Programming Manual V1.2
6
CODABAR
1
k
′
48
d
57, 65
d
68 , 36,
43, 45, 46, 47, 58
②
65 UPC-A
11
n
12
48
d
57
66 UPC-E
11
n
12
48
d
57
67 JAN13 (EAN13)
12
n
13
48
d
57
68 JAN 8 (EAN8)
7
n
8
48
d
57
69 CODE39
1
n
255
48
d
57, 65
d
90, 32,
36, 37, 43, 45, 46, 47
70 ITF
1
n
255 (even
number)
48
d
57
71 CODABAR
1
n
255
48
d
57, 65
d
68 , 36,
43, 45, 46, 47, 58
72 CODE93
1
n
255
0
d
127
73 CODE128
2
n
255
0
d
127
[Notes for
①
]
This command ends with a NUL code.
When the bar code system used is UPC-A or UPC-E, the printer prints the bar code
data after receiving 12 bytes of bar code data and processes the following data as
normal data.
When the bar code system used is JAN13 (EAN13), the printer prints the bar code
after receiving 13 bytes of bar code data and processes the following data as
normal data.
When the bar code system used is JAN8 (EAN8), the printer prints the bar code
after receiving 8 bytes of bar code data and processes the following data as normal
data.
The number of data for the ITF bar code must be even numbers. When an odd
number of bytes of data is input, the printer ignores the last received data.
[Notes for
②
]
n indicates the number of bar code data bytes, and the printer processes n bytes
from the next character data as bar code data.
If n is outside the specified range, the printer stops command processing and
processes the following data as normal data.
[Notes in standard mode]
If d is outside the specified range, the printer only feeds paper and processes the
following data as normal data.
If the horizontal size exceeds printing area, the printer only feeds the paper.
This command feeds as much paper as is required to print the bar code, regardless
of the line spacing specified by
ESC 2
or
ESC 3
.
This command is enabled only when no data exists in the print buffer. When data
exists in the print buffer, the printer processes the data following m as normal data.
After printing the bar code, this command sets the print position to the beginning of
the line.
