37
Fehler
Ursache
Lösung
Filter lamp & Purifying lamp & Cylinder
lamp flashes quickly
PCB communication failure between touch
board and power board
Check the touch board and power board. Supply power after
removing the fault
Hot lamp & Ambient lamp& Cold lamp
flashes quickly
Shortage of water in the Ice bank tank
Follow the instructions of 3-2 (Using the product) point 1 and
2 to fill the water into the ice bank tank
Hot lamp & Ambient lamp& Cold lamp
& Sparkling lamp flashes quickly
Full of water in the Ice bank tank
Power off. Remove the cap of the ICEBANK tank drain and
pull the plug, drain some water and then put the plug and cap
back. Supply power after removing the fault
Hot water lock lamp & Reheat lamp
& continuous water lamp icon flashes
quickly
Shortage of water supply
Supply power again after supply water into the water inlet
In case of failure, please carry out inspection according to requirements below. If the solution need dismantled the machine,
please contact the local service agency.
Note
Safety
precautions
Product
introduction
W
orking
principle
Using the product
trouble-
shooting
USE Guide & maintenance