3 Programs and Program Control
User Instructions HairMaster® | 751 250
47
GB
3.2 Operation of the Programs
A hair treatment program is configured for the desired
purpose and started afterwards.
In the following, the
W
AVING
hair treatment program is
presented as an example in order to demonstrate the
operation of these programs.
The
Turn and Push
program control is operated by
means of the Easy Control Wheel
3
and works
according to the following principle:
•
Scrolling
- the menus with
Turn
(i.e. by turning the
Easy Control Wheel to the left
1
or to the right
2
; the color of the light ring changes from blue to
red),
•
Highlighting
- a property or a value,
•
Activating
- a selection or a function key with
Push
(by pressing the Easy Control Wheel
3
).
Display functions:
The following information is displayed during the
operation of the program control:
• in the information bar
4
: the designation of the
program which is currently configured,
• in the selection box: either
the available functions
5
or the available values
6
,
• in the task bar
7
: the function keys of the next
navigation steps possible.
The programs are configured as follows:
The configuration always starts in the
main menu
A
which shows the programs currently available for
selection.
The settings, i.e. the functions and values for hair
treatment, are selected in the
configuration menus
B
of a program.
The
Start menu
C
of a program provides a list of the
most important settings
8
.
The task bar shows the two function keys for returning
a
into the configuration menu and for the program
start
9
.
To start the program:
Highlight the
S
TART
9
function key and then
press
P
USH
to activate it.
_GA_HairMaster_GB.book Seite 47 Donnerstag, 6. September 2012 10:09 10
