Belux Multisens II, Руководство по эксплуатации

Страница: 4 / 12

BELUX Multisens has been developed for
adjusting and controlling the intensity of light
in the workplace, which enhances comfort
at work. Compared to standard workplace
lighting, energy savings of up to 70% are
possible.
LIGHT SENSOR
The light sensor measures the amount of light
in the workplace and, where necessary, com-
pensates daylight with artificial light. If there
is sufficient daylight, the sensor turns off the
lamp. An interval of approx. 2 minutes prevents
short-term ambient factors from influencing
these functions directly.
MOVEMENT SENSOR
Detects the presence of people within an area
of approx. 4 x 4 m, switching on the light if
necessary, and off again after a 15-minute
interval.
INFORMATION
After switching on, the lamp adjusts to the set
value in approx. 10 seconds. This may cause
the lamp to flicker briefly.
START UP
Connect lamp to mains
The lamp is switched on. It is in automatic
control mode (mode 5: light and movement
sensors activated).
Switch on lamp by hand
A brief press of the switch turns the lamp off.
It will return to the original mode if the switch
is pressed again briefly.
PROGRAMMING LIGHT INTENSITY
The lamp must be set to automatic control
(mode 5, i.e. factory setting). Programming
should be done without daylight access.
Press the switch and hold
The light intensity changes. It remains constant
after the switch has been released.
Adjusting the dimmer strength
Every prolonged press of the switch causes an
increase or decrease in the intensity of the light.
Save setting
Release the switch once the desired intensity
has been reached. Turn off the lamp after
10 seconds (press switch briefly) and then
turn on again (press switch briefly). The new
setting is saved.
THE DISPLAY DIODE…
… is green
Power is being sent to the light.
… flashes red/green
movement sensor detects movement.
… is red for approx. 10 seconds
The setting is being saved.
… is red after switching on
The program is being restarted.
… flashes red/green rapidly
Maximum or minimum intensity of the lamp
has been reached.
ENGLISH