Details of Programming
14
PPiilloott ((PPoowweerr-oonn iinnddiiccaattiioonn))
Note: When you are using the Dark mode,
the display will only show HD, AD, or CD,
(Highway-Dark, AutoScan-Dark, or City-
Dark).
Pilot Hwy
(Full description)
In this setting, XR70 will display
“Highway,” “City,” or “AutoScan” as its
power-on indication. (factory default)
Pilot H
(Letter)
In this setting, XR70 will display “H” for
Highway, “C” for City, and “A” for
AutoScan.
Pilot V
(Vehicle voltage)
In this setting, XR70 will continually display
“H” for Highway, “C” for City, and “A” for
AutoScan, and the vehicle’s voltage. If the
vehicle’s voltage drops below 10.5 volts, a
low voltage warning is displayed, followed
by an audible alert. A high voltage warning
is also given if the voltage goes above 16.0
volts. The high-voltage warning is also
followed by an audible alert.
VVooiiccee
Voice 0n
(Voice announcements on)
In this setting, all radar, laser, and SWS
messages (if programmed) will be
announced using a digital voice.
Voice 0ff
(Voice announcements off)
In this setting, only the distinct audio tone
will be heard when a radar, Laser, or SWS
message is detected.
PPoowweerr-oonn SSeeqquueennccee
Pwr0nSTD
(Standard)
In this setting, each time you turn on XR70,
it will display "Laser," "Ka-band," "K-band,"
"X-band" followed by a brief alert.
If any bands have been changed from
the factory default settings, a double tone
and corresponding message (i.e. “K OFF”),
will alert you that one or more bands have
been changed.
Pwr0nFST
(Fast power-on)
In this setting, XR70 will provide a single
tone. If any bands have been changed from
the factory default settings, a double tone
and corresponding message (i.e. “K OFF”),
will alert you that one or more bands have
been changed.
15
SSiiggnnaall SSttrreennggtthh MMeetteerr
MeterSTD
(Standard meter)
In this setting, the meter displays the band of
the received signal, and a bar graph shows
the relative signal strength. (factory default)
MeterTEC
(Tech Display meter)
In this setting, the meter displays the actual
numeric frequency of the radar signal
received.
Note: The Tech Display feature is
explained in more detail on page 11.
AAuuttooMMuuttee
aMute 0N
(AutoMute on)
In this setting, XR70’s audio alerts will
initially be at the volume you set, but after a
few seconds, XR70 will automatically
reduce the volume level, to keep you
informed, but not annoyed. (factory default)
aMute 0FF
(AutoMute off)
With AutoMute off, XR70’s audio alerts
will remain at the volume you set for the
duration of the radar encounter.
CCiittyy MMooddee SSeennssiittiivviittyy
CitySTD
(Standard)
Function not used. No X band in XR70.
CityLoX
(Low X band sensitivity)
Function not used. No X band in XR70.
CityNoX
(No X-band sensitivity)
Function not used. No X band in XR70.
v995 manual-neltronics_310107.qxp 15/02/2007 2:59 PM Page 17
