Programming
12
There are 7 user-selectable options so you
can customize your XR70 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PGM, RVW, and CHG
are located on the top of the detector, and are
highlighted in colored graphics. Pages 14-16
explain each option in more detail.
HHooww ttoo uussee PPrrooggrraammmmiinngg
1
To enter Program Mode, press and
hold both the CITY and BRT buttons
down for 2 seconds.
(The unit will beep
twice, and will display the word
Program
).
2
Then press the RVW button to
review the current settings
. (You can
either tap the button to change from item to
item, or hold the button to scroll through the
items).
3
Press the CHG button to change any
setting.
(You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4
To leave the Program Mode, simply
wait 8 seconds without pressing any
button, or press the PWR button.
(The
unit will display
Complete
, beep 4 times,
and return to normal operation).
An example
Here is how you would turn XR70’s
AutoMute feature off.
1
Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. XR70
will beep twice and display
Program
.
2
Then hold the RVW button down.
XR70
will scroll through the categories,
starting with Pilot
(
Pilot
),
Voice
(
Voice
)
, Power-on sequence
(
Pwr0n
),
Signal strength meter
(
Meter
)
, and then
AutoMute
(
aMute
).
3
Release the RVW button when XR70
shows the AutoMute item.
Since the factory
setting is for AutoMute to be on, XR70 will
display
aMute 0n
.
(If you accidentally don’t release the
RVW button in time, and XR70 goes to the
next category, hold the RVW button down
again, and after XR70 scrolls through all
categories, it will begin again at the top of
the list.)
4
Press the CHG button to change from
aMute 0n
to
aMute 0FF
.
5
To complete the Programming, simply
wait 8 seconds without pressing any button,
or press the PWR button.
The XR70 will
display
Complete
, beep 4 times, and
return to normal operation.
Overview of Programming
13
Pilot HWY
Pilot H
Pilot V
Voice 0N
Voice 0FF
Pwr0n STD
Pwr0n FST
Meter STD
Meter TEC
aMute 0N
aMute 0FF
City STD
City LoX
City NoX
Bands ALL
Bands M0D
K
0N or 0FF
(default is on)
Ka
0N or 0FF
(default is on)
P0P 0N or 0FF
(default is off)
Ku
0N or 0FF
(default is off)
LSR 0N or 0FF
(default is on)
SWS 0N or 0FF
(default is on)
Press the CHANGE button
to change your setting
within a category
*Full word: Highway or AutoScan or
City Letter: H or A or C
Vehicle voltage
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*Standard signal strength meter
Tech Display
*AutoMute on
AutoMute off
*Standard City mode sensitivity
No X band in XR70
No X band in XR70
*All bands enabled
One or more bands are disabled
Turn bands “ON” or “OFF” by
pressing the VOLUME/MUTE button
Press the REVIEW button
to go from one category to
the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH
METER
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
*
FFaaccttoorryy DDeeffaauulltt SSeettttiinnggss
To reset XR70 to its original factory
settings, press and hold the “CITY”
and “BRT” buttons while turning the
power on. XR70’s display will
provide a “Reset” message,
accompanied by an audible alert,
acknowledging the reset.
v995 manual-neltronics_310107.qxp 15/02/2007 2:59 PM Page 15
