Belshaw Bros., Inc.
•
www.belshaw.com
•
Phone 206-322-5474
•
Fax 206-322-5425
SF 18/24/34 TS
MN-1408EN
5
THE PUMP MOTOR WILL NOT OPERATE.
Possible Causes
What To Do
The power cord is not connected to the power
supply.
Connect the power cord to the power supply.
The power supply does not match the power
requirements of the machine as specified on the
data plate.
Connect the machine to a proper power supply.
The circuit breaker has been tripped.
Push the reset button.
WARNING
Before doing the following, turn off the
machine, allow it to cool, and disconnect it
from the power source.
The wiring is faulty.
Correct the wiring. Call Belshaw for help.
The power switch is defective.
Repair or replace the power switch.
The motor is defective.
Repair or replace the motor.
THE SHORTENING FLOW THROUGH THE SYSTEM IS SLOW OR
RESTRICTED.
Possible Causes
What To Do
The hose is crimped.
Straighten the hose.
Solid shortening is building up inside the hose and
pump
Filter shortening at a higher temperature.
WARNING
Before doing any of the following, turn off the
machine and allow it to cool.
The hose is plugged.
Clean the hose.
The pickup tube is plugged.
Clean the pickup tube.
The bleeder tube is plugged.
Clean the bleeder tube.
