Belshaw Brothers 616B, Руководство оператора, техническое приложение, каталог запчастей и электрические схемы

Страница: 10 / 31

Belshaw Adamatic Bakery Group • service@belshaw.com • 800-578-2547 • (+1) 253-886-5340
8 MN-1137EN 616B OM
WARNING
Do not use a plastic container. If the
shortening is not cool enough, the container
will melt, possibly causing you to be
burned, and causing shortening spill.
WARNING
Do not allow the shortening to overflow the
containers. Shortening will get on the
floor, and if the shortening is not cool
enough, you may be burned.
4. After the kettle has been drained, brush any
accumulated carbon from the heater coils.
Accumulated carbon causes corrosion and
poor heat recovery.
5. Remove the drain tray.
WARNING
Thoroughly clean and dry the floor if
shortening is spilled. Shortening on the
floor can cause serious injury or loss of life.
6. Remove the heater head and element.
7. Lift out the kettle and pour out the remaining
shortening and accumulated sediment.
8. Flush out the kettle with hot water to remove
all sediment.
Washing
1. Wash the kettle carefully with detergent to
remove all stains and burned shortening.
2. Scrub the inside of the kettle. Do not use
any abrasive cleaners or scrapers.
WARNING
To avoid being burned, be very careful as
you work with hot cleaning solution. Never
put your hands in the solution. Wear
gloves and long sleeves in case any solution
splashes.
3. Dry the kettle thoroughly with a soft cloth
before replacing in the fryer cabinet.
WARNING
Dry the kettle thoroughly. Moisture causes
hot shortening to spatter or erupt.
Shortening may spatter or overflow the
sides of the fryer may result in fire, serious
injury, or death.
4. Make sure the kettle is properly seated in the
case.
5. Install the heater head.