Belshaw Brothers 22587-20, Руководство оператора

Страница: 6 / 71

OTHER EQUIPMENT
•
EZ Melt 18 melter-filter system (purchased separately)
ELECTRICAL INFORMATION
•
Single power connection
•
208-240V, 50-60hz, 1ph
- Insider with Donut Robot
®
Mark II/Mark II GP: up to 36 Amps
- Insider with Donut Robot
®
Mark V/Mark V GP: up to 50 Amps
•
North America models supplied with NEMA#14-50 plug
•
International voltages available
INSTALLATION & CLEARANCE
•
Installation and usage may require approval by local jurisdictions.
(Customer is responsible for such approval)
•
36" (92 cm) space at rear to allow room for operator, and to allow
EZMelt 18 Melter Filter to roll out
•
36" (92 cm) at left side (viewed from rear) for operator access to
the left and rear of the unit
•
29" (74 cm) overhead clearance for air discharge (nominal)
SHIPPING WEIGHT AND DIMENSIONS (estimated)
•
90" W x 43" D x 89" H (229 x 109 x 226 cm)
•
1444 lbs (656 kg), USA Freight Class 175
STANDARDS CERTIFICATION
NSF STD 4
CSA C22.2 UL197
UL710B
•
Certified by ETL to UL-197, UL-710B, NSF-4 and CSA C22.2
standards. (ETL Control #68183)
•
CE models available for European Union and other countries
35" (89 cm)
STOP/START SWITCH
FIRE SUPPRESSION
MANUAL PULL STATION
WET FIRE
SUPPRESSION
CYLINDER
FIRE SUPPRESSION
CONTROL BOX
ROTO COOLER
DONUT ROBOT
12" (30 cm)
31" (79 cm)
6.5" (16 cm)
POWER
POWER
FILTRATION RECEPTACLE
FRYER RECEPTACLE
FRONT
REAR
HOOD/CLEAN AIR ASSEMBLY
AIR DISCHARGE
P
OVERALL HEIGHT:
91.5" (232 cm)
POWER CORD 72" (183 cm)
PLUG NEMA #14-50 (1-PHASE)
NEMA #6-50P (3-PHASE)
84¼" (214 cm)
Nominal clearance
for air discharge
18" (45 cm)
P
EZMELT 18
MELTER FILTER
STANDARD FEATURES - INSIDER CABINET
•
Air recycling system, with fan-assisted grease filter, electronic filter, and odor filters
•
Interlock system to ensure ventilation is active. Fryer is otherwise shut down or
unable to start
•
Donut Robot® fryer (specify model from list below) and Roto-Cooler
•
Fire suppression system (Pyro-Chem Kitchen Knight II, PLC-240/300). Operates
automatically, also manually from a pull station
•
Stainless steel construction
•
Removable clear polycarbonate viewing windows
•
Heavy Duty 4" casters (feet optional)
COMPATIBILITY WITH DONUT ROBOT
®
FRYERS
Insider is compatible only with Donut Robot
®
Mark II, Mark II GP, Mark V, or Mark V GP
•
For standard size donuts, use Donut Robot
®
Mark II or Mark V
•
For mini donuts, use Donut Robot
®
Mark II GP or Mark V GP
•
To make standard size AND mini donuts, use Donut Robot
®
Mark II or Mark V, along
with Mini Donut Hopper/Plunger Kit, Part #MK-1502-1
•
See Donut Robot Mark II/Mark V spec sheet for specifications
•
Insider is not compatible with Donut Robot
®
Gas Mark II/Mark II GP
DONUT ROBOT
®
FRYERS – CAPACITY ESTIMATES
Standard Donuts Mini Donuts
Mark II
37
Dozen/hour –
Mark II GP –
153
Dozen/hour
Mark II with Minidonut Kit
37
Dozen/hour
109
Dozen/hour
Mark V
56
Dozen/hour –
Mark V GP –
226
Dozen/hour
Mark V with Minidonut Kit
56
Dozen/hour
163
Dozen/hour
Estimates are based on full capacity at frying times of 95 seconds for standard donuts
and 60 seconds for mini donuts.
Clearance 36" (92 cm)
for operator
Clearance 36" (92 cm)
for operator
The Spirit of Excellence
an Ali Group Company
90 Years of Quality Donut & Bakery Equipment www.belshaw.com
Phone
800.578.2547 • (+1)206.322.5474
Customer Service
info@belshaw.com
Technical Support
service@belshaw.com
©2017 Specifications are subject to change Current version available from www.belshaw.com/retail
BELSHAW ADAMATIC BAKERY GROUP 814 44th St NW, Suite 103, Auburn, WA 98001
Product Line
INSIDER
Ventless Donut Center
Models
INSIDER/Mark II • INSIDER/Mark V
Page
2
of 2