Remember if you need help contact Customer Care: 1+ (619) 449-2392
|8
Step 1:
Start by lining up the
notch on the bottom of the
battery compartment door
with the notch in the bottom
of the battery opening.
Step 1:
Carefully disconnect
the battery compartment
door from the base by gently
pulling outward from the top.
Step 2:
Push the battery
compartment door in toward
the base. You will know it is
in position when the magnet
locks the door in place.
Step 2:
Then, pull the
battery compartment door
up and out to remove from
the base.
Once the door is in place, you
may notice a small notch in
the bottom left corner of the
battery compartment door.
This notch is for
an optional
accessory not available on
this unit.
DO NOT OVEREXTEND THE
BATTERY COMPARTMENT
DOOR BY PULLING DOWN!
This may cause damage to
your new
Belmont Garden
TM
.
Inserting the Battery Compartment Door
After you have connected the cables inside your fountain to the rechargeable battery,
you should then place the battery compartment door on the base of the fountain.
STOP
At this point, your fountain should look like the
image on the left. Go to the next page for the next
step to setup your new Belmont Garden
TM
.
Removing the Battery Compartment Door
