Remember if you need help contact Customer Care: 1+ (619) 449-2392
|10
Fill Your Fountain
Fill the fountain tier until water pours over the spouts. Then fill the large bowl until the
water is about 1 inch (2.5 centimeters) from the top of the bowl.
After you have filled your fountain, grab both sides of the large bowl and quickly shake
your fountain for ten seconds. This is to dislodge any air bubbles that may be caught
in your water pump. Press the C button once to turn your fountain on. Water should be
flowing from the top of your fountain. If water is not flowing, press the C button once
more to turn your fountain off, and repeat the step above.
IF YOUR FOUNTAIN IS MAKING A LOUD NOISE, DON’T PANIC!
This just means that there are air bubbles stuck in the water pump. Your pump will
not be harmed and you can easily fix this issue. You can try priming the fountain again
by repeating the steps above, however, if the problem still persists, you can find the
solution on page 19.
Operating Your Fountain
The on-board control panel is located towards the top of the base, just below the large
bowl. See the diagram below to see how the all-new on-board controls work for your
Belmont Garden
TM
.
Manual On/Off
1-4 Hour Timer
Status Light
1-4 Hour Daily Timer
(Repeats Every Day)
This Feature Is
Not Used On
This Model.
BUTTON
DESCRIPTION
A
(1-4 Hour Timer)
Runs the fountain for 1-4 hours with automatic shut off.
One hour operation:
press the A button once for your fountain to
turn on with an automatic shut-off after one hour of operation.
Two hour operation:
press the A button twice and your fountain
will automatically shut-off after two hours of operation.
