BellSouth GH9497, Руководство пользователя

Страница: 7 / 58

BASE UNIT Controls
1. Button: Press and hold down to record memo messages.
2. Button: Press to set/check the day and time.
3. (OUTGOING MESSAGE) Button: Press to set/check the day and time.
4. Button: Press to erase messages.
5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. (SPEAKERPHONE) Button: Press to answer a call using the BASE UNIT.
7. IN USE LED Indicator: Lights up to indicate that the HANDSET is in TALK mode.
8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the
answer function is turned ON.
9. MICROPHONE
10. (ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the
answer function.
11. MINUTE Button: Press to PAGE the HANDSET . Press again to stop.
12. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 12 seconds
when a new message has been received.
13. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 12 seconds
when a new message has been received.
14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM - System records the incoming messages.
ANNC - System plays your announcement and then hangs up without
recording messages.
15. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the
BASE UNIT .
16. RING SELECT Switch: To select the number of rings before the Answering System
answers a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
MEMO
ERASE
TIME
ANS
ON/OFF
PAGE
OGM
SPK