BellSouth GH9497, Руководство пользователя

Страница: 36 / 58

Answering System Operation
28
Recording Your Outgoing Messages
Your Answering System provides one PRIMARY MAILBOX and four individual
MAILBOXES (1, 2, 3, 4) which can receive their own Incoming Messages (ICM). Before
using your Answering System, it is suggested that you record an Outgoing Message
(OGM). This is the announcement callers will hear when the system answers a call.
A prerecorded system announcement “ Please record your message after the beep ” is
available if you choose not to record your own OGM.
1. Day Setting
Press and hold down the button for 2
seconds then press the or button
to select the day tim setting. Press the
button again to accept the setting,
and then it will continuously jump to the
hour setting.
2. Hour Setting
Press the or to select the hour,
then press the button to accept the
setting. The entry will continuously
jump to the minute time setting.
3. Minute Setting
Press the or to select the minute,
then press the button to accept the
setting.
TIME
TIME
RPT
SKIP
TIME
RPT SKIP
RPT
SKIP
TIME
NOTES:
1. The HANDSET and BASE UNIT clocks are independent from each other.
Set the HANDSET clock by following the time setting steps on page 23.
2. In case of power failure, reset the time setting on the BASE UNIT clolck.
IMPORTANT: To ensure the proper operation of your Answering System:
1. Plug the AC ADAPTOR into the POWER-IN CONNECTION jack.
2. Press and hold down the RESET button for 2 seconds at the back of the BASE UNIT before
initail use.
Setting the Day/Time Stamp