Cordless Telephone Operation
11
Receiving Calls
1.
When the phone rings, the LCD Screen
will show “RING.” If you have Caller ID,
the LCD Screen will show the Caller ID
information after the first ring.
2.
With the
HANDSET
off the base, press
the button. Start your conversation.
The Call Timer starts to count.
3.
To end your conversation, either press the button or place the
HANDSET
on
the
BASE UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE,
you activate the AUTOMATIC STANDBY feature.
NOTE:
The Call Timer will start to count once you press the button.
Minutes
Seconds
Call Timer Display
02 08
IMPORTANT
Do not use this telephone within 20 ft. of a microwave oven
while it is working, as you may experience interference.
This is a normal occurrence with 2.4 GHz phones and
should not be interpreted as a defect in the product.
Preparing for Use
Before you can use your cordless telephone, you must charge the
HANDSET
for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
1.
Place the
HANDSET
on the
BASE UNIT
for 12 hours.
2.
After 12 hours, remove the
HANDSET
from the
BASE UNIT
.
Before you can use your cordless telephone, you must charge the HANDSET
for 12 hours. Failure to do so will require more frequent charging of the
BATTERY PACK. See page 37 for more information on the BATTERY PACK.
NOTE:
Depending on the frequency of use, once the
HANDSET
is fully charged, it remains
functional for approximately 4 hours of continuous use and approximately 5 days when
the
HANDSET
is off the
BASE UNIT
in STANDBY mode.
TALK
TALK
TALK
TALK
TALK
Содержание GH9497
Страница 54: ...Notes 46...
Страница 55: ...Notes 47...
