7. Install the
H A N D S E T
B AT T E RY PACK by
plugging it into the BATTERY CONNECTOR
inside the BAT T E RY C O M PA RT M E N T. T h e
HANDSET
LCD Screen will display
“
RING: HI
”
.
8. Place the BATTERY PACK inside the BATTERY
COMPARTMENT.
9 . Slide the
H A N D S E T
B AT T E RY C O M PA RT M E N T
COVER firmly into place in its closed position.
10.
IMPORTANT: Before initial use, charge the
HANDSET for 12 hours. Do not charge the
HANDSET with the KEYPAD face down.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select Switch
to the TONE position.
B. If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the PULSE
position.
C. If you are unsure which system you have, set
the TONE/PULSE Select Switch to the TONE
position. Press the
button on the
HANDSET
to get a dial tone and make a call.
If the call connects, leave the switch as is;
otherwise set to the PULSE position.
talk
7
Getting Started
RING: HI
