FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FI G.2:
Slide the Vertical Seat Post (pt.10) into
the seat post housing on the main frame
(pt.16). And put the knob up, then release
the round nut(pt.48)
, Then slide the
Seat Post (pt.12) into the Vertical Seat
Post (pt.10),Then fixing the bolt8 (pt.48)
，
You will have to slacken the knurled
section of the Adjustment Knob (pt.9) and
pull the knob back and then select the
desired height. Release the knob and
retighten the knurled portion.
Now fix the Seat (pt.13) to the Seat Post
(pt.12) as shown, and tighten the bolts
around the screws under the seat.
FIG.1:
Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of
Ø10 Flat Washers (pt.5) and bolt 1 (3).
Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of
Ø10 Flat Washers (pt.5) and bolt 1 (3)
5
