TABLE OF CONTENTS
1. Manual and maintenance
11
2. General features
11
Blade shaft
11
Skate
12
Shaft guide
12
Rear wheel
12
Chassis
12
Cooling blade saw system
12
3. Before machining
12
Motor
12
Blade cooling
12
Selecting and fixing saw blade
12
Shaft guide regulation
13
4. Machining
13
Start up
13
Control cutting depth
13
Cutting correction
13
5. End the cutting
13
6. Maintenance
13
Motor
13
Belts
13
Lubrication of the spindle
13
Daily
13
7. Technical data
13
MANUAL AND MAINTENANCE
This manual must be considered as a part of the
machine. Before leaving the factory, each machine passes
several quality controls, tests and proofs that assure a
correct perform.
The aim of this manual is to help the machinist to make a
correct set up of the machine and a correct use, in order to
comply with the Safety European Directives and to avoid
any hazard due to any wrong use.
GENERAL FEATURES
Blade shaft
The blade shaft is manufactured with a high quality steel,
for 25,4 mm blade shaft, on two stands with floating bearings,
straightened in an axial position. The flanges guaranties the
11
GB
1
2
