www.tsicustomerservice.com
A474
19
NOTE:
Please operate the remote control at a slow
measured pace. Press the remote control buttons with
an even motion and gentle pressure. Repeatedly pressing
buttons in rapid succession may cause the transmitter to
malfunction.
NOTE:
Do not mix old and new batteries. Do not mix alkaline,
standard (carbonzinc), or rechargeable (nicad, nimh, etc)
batteries.
When the remote control stops operating or its range
seems reduced, it is time to replace the battery with
new ones.
On the back end of the remote, press and slide
the battery door open and remove the old batteries.
Insert two AAA batteries, checking that the + and -
sides of the battery match inside the battery
compartment.
Replace the battery compartment door.
The battery may contain hazardous substances that
could endanger the enviroment and human health.
This symbol marked on the battery and/or packaging
indicates that used battery shall not be treated as
municipal waste. Instead it should be left at the
appropriate collection point for recycling.
By correctly disposing used batteries, you prevent
potential negative consequences for the environment
and human health. Recycling used materials also
conserves natural resources.
For more information about collecting and recycling
used batteries, please contact your local municipality,
your waste disposal service or the point of sale where
you purchased this product.
Replacing the Remote Control Battery
Disposing of Used Batteries
Using the Power Cord Correctly
This heater is for use on 120 volts. The cord has a plug as shown in the
fi
gure.
Connect to properly grounded outlets only.
Do not use a 2 prong adapter. Never use with an extension cord or
relocatable power tap (outlet/
power strip).
NOTE:
Batteries should be removed if the product is
to be left unused for a long time.
Operation (continued)
