Bellman & Symfon Visit Smart hub BE1310, Руководство пользователя

Страница: 4 / 25

+
Pairing with easyTek
™

Press and simultaneously on easyTek until easyTek’s blue LED
starts to flash. The LED will then stay lit for 5 seconds during the pairing
procedure. When pairing is completed the LED will turn off.

If no steady light appears, ensure that easyTek is within range from the
Smart hub and try pairing the units again, see the easyTek user guide .
Setting up the Smart hub
1 Pull the battery tab to start the unit. Remove the protective film from
the Velcro® and mount the Smart hub on the wall.
2 Plug the power supply into the mains outlet.
3
Press and hold the top button until the top led starts to blink in blue.
1 2
Steady
Pairing
Off
Done
Flashing
Ready
5 6
3
+
Appearance may
differ with territory.