Bellman & Symfon Visit Smart hub BE1310 Скачать руководство пользователя страница 23

Model, type and classification

The information is available at the back of the Visit Smart hub.

Product disposal and recycling information

The symbol to the left means that according to local laws and 

regulations your product should be disposed of separately from 

household waste. When this product reaches its end of life, take it 

to a collection point designated by local authorities. The recycling of your 

product will help conserve natural resources and ensure that it is recycled 

in a manner that protects human health and the environment.

Battery disposal information

This symbol indicates that the product contains batteries that ac-

cording to local laws and regulations must be disposed of separately 

from household waste. Take used batteries to a collection point 

designated by local authorities.

43

44

© and TM 2015 Bellman & Symfon AB. All rights reserved. Bellman and Bellman & 

Symfon are registered trademarks owned by Bellman & Symfon AB.

The European Union - declaration of conformity

Hereby, Bellman & Symfon AB, declares that this 

product is in compliance with the essential require-

ments and other relevant provisions of R&TTE 1999/5/EC, LVD 2006/95/

EC, MDD 93/42/EEC and EMC 2004/108/EC directives. The declaration 

of conformity may be consulted at Bellman & Symfon Europe AB, Södra 

Långebergsgatan 30, 421 32 Västra Frölunda, Sweden.

Bluetooth®

*

 certified

This device includes a Bluetooth module which has passed  

the BQB certificate. The certificate number is B022163.
* The Bluetooth word mark and logos are owned by the Bluetooth SIG, 

Inc., and any use of such marks by Bellman & Symfon is under licenses.

0359

Содержание Visit Smart hub BE1310


























Отзывы: