GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 www.belliniappliances.com.au
Model: BRE133BI Fineline: 5104015 Built-In Drawer Refrigerator
CARING FOR THE APPLIANCE
CLEANING
1.
BEFORE CLEANING turn the appliance off at the power point and unplug the
cord to prevent any chance of electrocution and remove all contents.
2.
Wash the inner compartment with warm soapy water, use a neutral detergent.
DO NOT allow the control panel, cables or plug to get wet. DO NOT use metal
or sharp objects to remove debris.
3.
After cleaning dry all surfaces thoroughly.
4.
To ensure trouble-free operation the condenser should be cleaned every three
months where appropriate using a vacuum hose. The condenser is located
behind the lower grill of the cabinet. In exceptionally dusty locations the
condenser should be cleaned more often.
5.
Use mild soapy water to clean the gasket and seals.
REPLACING THE LAMP
1.
Switch off the power at the power point and remove the cord by pulling the
plug.
2.
Unscrew and remove the screws on both ends of the light cover, take down the
lamp cover, pull out the wires then remove the bulb.
3.
Install the new bulb, connect the wires, replace the lamp cover and refit the
screws.
4.
Wait for at least 5 minutes before plugging in and restarting the appliance to
avoid damaging the compressor.
WARNING: Never insert your finger into the light bulb socket.
Page
9
Содержание BRE133BI
Страница 2: ......
