Bellini BRE133BI, Инструкция по установке и эксплуатации

Страница: 6 / 16

GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 www.belliniappliances.com.au
Model: BRE133BI Fineline: 5104015 Built-In Drawer Refrigerator

Do not use damaged appliances. If you are in doubt, consult an authorised
service agent.

Connection and installation of the refrigerator is to be carried out in strict
compliance with the relative instructions in this manual.

Do not damage any parts of the appliance which carry refrigerant by piercing,
perforating, crushing, twisting or scraping. If the refrigerant comes into contact
with the eyes, it may cause serious eye injury.

Always remember to unplug the appliance before cleaning. Never unplug the
appliance by pulling on the power cable. Always switch off the appliance at the
power socket, grip the plug firmly and pull the plug straight out of the socket.
Always check that the plug and cable are undamaged.

All repairs must be made by the manufacturer, its service agent or similarly
qualified service technician. Inadequate repairs may be dangerous. Never try to
repair the appliance yourself.

Should the cover of the interior light fall off or break, immediately switch off
the appliance and replace the cover.
 Ensure the location has a flat, level and stable surface. The appliance may be
levelled by turning either or both of the adjustable feet in the front corners.
Check that the appliance is level using a spirit level. Foot adjustable dimensions
minimum 16mm, maximum 24mm. Appliance dimensions
600mmWx600mmDx865mmH

Do not obstruct or cover the ventilation aperture.

Do not position the appliance with its rear panel directly against a wall.
Maintain a gap of at least 50mm between the appliance and any adjacent wall.
 Position the appliance away from heat sources, ensure the appliance is well
ventilated and protected from moisture or extremes of heat or cold.

The appliance may not function properly if the temperature rises above +30
O
C
(standard model).

Do not allow children to play with the appliance, or sit on it or to hang on to the
door(s) or drawers.
 Ensure the power point is properly earthed to ground. Consult a qualified
electrician if you are unsure.
Page 3