1.
Depending on the specific cabinet construction the oven is to be
fitted into, it may be
required to raise the oven within the cabinet cavity to provide ade-quate clearance when oven
door is in the fully open position.
This is particularly relevant when a draw with draw front or panel is
fitted directly below the
bottom oven door.
Should the oven door when fully opened interfere with the top of the
cabinet draw
front/panel,
then there are two options:
1.
Lower the draw front fit to draw itself (Where this is physically
possible to do so).
2.
Raise the actual oven within the cabinet cavity from the cavity floor/shelf by 4.0 mm
600
563
Min570
Min550
50
Min
Air vents
The minimum area of the
bottom vent is 250cm²
Min895
*
320Min
20MM
20MM
5MM
115Min
INSTALLATION
5
Technical Specifications
P
roduct
D
imensions
(h x w x d) m m
N
et
W
eight
Capacity
E
lectrical
C
onnection
M
ax.
P
ower
R
ating
885 x 594 x 563
Approx. 51.2 KG
35 L (Upper)
230-240V~/50Hz-60Hz
4.5kW
Useable
70 L (Lower)
