USING THE CLOCK/PROGRAMMER-ELEC
3) After counting down stopping, if
there’s no operation for 2
minutes, buzzing will stop.
4) If set duration time before end time,
end time can only be added, not
decreased. (The max time added can be
after 23h 59m. When end time is longer
than duration time+ current time, end
time can be decreased by pressing button
2. It will be decreased until end time equals
to duration time+ current time+ 1 minute).
If end time is longer than duration time
+ current time, power will be off, end time
icon will display. When end time equals to
duration time+ current time, power will be
on again, end time icon will turn off.
3
、
time function
1) Press button 1 to choose time
function. Time icon will flash, press
button 2 or 3 to set time. The range is
24hrs. Press once to plus or minus 1,
hold for 3 seconds for quick-adjust. No
operation for 5 seconds, the time of
day will show, time icon will turn off.
2) If time setting is changed after
setting alarm, duration and end time, the
alarm will not be changed, and duration
and end time will reset.
4
、
lock function.
Press lock button for 3 seconds any
time, the lock function will active, and
lock icon will display. Press lock button
for 3 seconds again, it will be unlock.
The icon turns off.
During the lock condition, press
button will cause buzzing, meanwhile
the lock icon will flash for 3 seconds.
5
、
Other notification
1) If setting alarm, duration time and end time,
alarm time will display, and alarm, duration,
end time icons will display.
2) After setting alarm, duration, and end time,
Button 1 can be pressed to check and
change alarm time, duration time, end time
and day time.
3) If duration time is later than alarm time,
there will be only buzzing for alarm. If duration
is earlier than alarm time, there will be only
buzzing for alarm.
21
