ASSEMBLY INSTRUCTIONS
Page 9/14
Diagram 3:
To attach the mattress support spring, carefully
place the spring frame in the crib so it rests on
the stabilizer bars. Attach lower portions of the
brackets to stabilizer bar using
4 screwes(H),4
self locking washers (J), and 4 wing nuts (G) like
DIAGRAM 3/A.
Tighten with a phillips screw
driver(Not included)
Note:
Wing nuts should be installed with self
locking washers on
inside
of the stabilizer bars.
STEP 3-
Matress Support Assembly
Diagram 4:
The mattress support spring has three height
positions. Use
4 screws (H), 4 self locking
washers (J), and 4 wing nuts (G)
to mount
upper arm of bracket to desired height.
(DIAGRAM 3/A)
Note: Wing nuts should be installed with self
locking washers on
inside
of the stabilizer bars.
DIAGRAM 3/A
G J H
Содержание ALEXANDER 4200
Страница 14: ......
