background image

5

• 

Do not modify this appliance.

• 

Do not place articles on or against the appliance.

• 

Servicing should be carried out only by authorised personnel.

•  Always switch off your appliance and allow it to cool down before 

you clean any part of it.

• 

Although every care has been taken to ensure this appliance has 

no sharp edges. We recommend that you wear protective gloves 

when installing and moving this appliance. This will prevent injury.

•  This appliance must be fitted to a switch providing all pole 

disconnection with a minimum contact separation of 3mm.

•  Connection should be made with a suitable flexible cable with a 

minimum temperature rating of 70°C.

• 

Only use accessories recommended by the manufacturer.

CAUTION

• 

The cooking process has to be supervised. A short term cooking 

process has to be supervised continuously.

• 

The use of a gas cooking appliance results in the production of 

heat, moisture and products of combustion in the room in which 

it is installed. Ensure that the kitchen is well ventilated especially 

when the appliance is in use: keep natural ventilation holes open 

or install a mechanical ventilation device (mechanical extractor 

hood). Prolonged intensive use of the appliance may call for 

additional ventilation, for example opening of a window, or more 

effective ventilation, for example increasing the level of mechanical 

ventilation where present.

• 

This appliance is for cooking purposes only. It must not be used for 

other purposes, for example room heating.

• 

(Gas through glass models only) In case of hotplate glass 

breakage, shut immediately off all burners and any electrical 

heating element and isolate the appliance from the power supply, 

do not touch the appliance surface, do not use the appliance.

• 

This appliance must not be installed behind a decorative door in 

order to avoid overheating.

Fire Safety Advice

•  If you do have a fire in the kitchen, don’t take any risks - get everyone out of your home and call the 

Fire Service.

Содержание GHU60





















Отзывы: