Bellfires Tunnel 3 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 112

Bellfires Tunnel 3 Скачать руководство пользователя страница 11

11

Bell

 res

English

Instructions for use

2.3.1 General

Read these instructions carefully before lighting the !

re ""

The appliance is opperated by radio remote control. This comprises a hand-held
transmitter and a receiver. The receiver is part of the gas control block assembly.

The receiver and the gas control block are behind the (white) panel door (operating unit)
next to the appliance. Press the door inwards to open; this will release the catch and the
door will spring out.

The hand-held transmitter and receiver are powered by batteries.
Hand-held transmitter : 1x 9V battery.
Receiver

: 4x 1.5V battery type LR6 or AA.

Option: 6V adapter (230 VAC). Available from your ! tter.

Note: Hand-held transmitter and receiver are

not

interchangeable with previous models.

The pilot light is situated in the front of the burner, behind a cowl.

Should the pilot light

go out, you must wait ve (5) minutes before attempting to re-ignite the re.

Important

Once the ! re is lit, it must burn at maximum for approx. 10 minutes to allow the chimney

to come up to temperature"

2.3.2 Hand-held transmitter

The remote control works by radio signal.

The hand-held transmitter is con! gured in the

factory with a unique signal code.

Figure 1: Hand-held transmitter

«
...
9
10
11
12
13
...
»

Содержание Tunnel 3

















































































































Отзывы:

Нет отзывов