U S E R M A N U A L
Email-to-SMS (e-2-s) Gateway
05.03.2018 BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Austria • Tel.: +43 (0)2822 33 33 990 •
www.bellequip.at
6
2.3 Email Client Mode
Settings for the email account, where e-2-s gateway gets emails from.
In this working mode, the e-2-s gateway collects emails from an existing mailbox (for example
mailbox on MS Exchange server) via POP3 or POP3-SSL in definable intervals. After collecting
the email, the e-2-s gateway evaluates the email-subject and processes that information to
create SMS.
Enable Client Mode: The Email-Client functionality will be enabled if the checkbox is checked.
If disabled, no emails will be collected from the mailbox.
Server Protocol:
Defines the protocol of the connection to your email server:
POP3: unsecured plain text connection
POP3-SSL: ssl secured connection
Email Server URL: The URL of your email server.
Email Server Port:
The Port of your email server.
Email Username:
The username to log into the email server.
Email Password:
The password to log into the email server.
To initially set or change the password, type a new password in the input
field. The password will not be visible in the input field after saving with
“Apply” button.
Retrieval Interval:
Polling interval for the POP3 Mailbox, to define how often the emails will
be collected.
Important: If you use a huge amount of emails together with a lot of
recipients, you have to set a higher interval. The minimum interval is 30
seconds.
How to use Microsoft Exchange Server as POP3 Mailbox:
Detailed information can be found at point 7) later in this document.
