BellEquip e-2-s, Руководство пользователя

Страница: 3 / 20

U S E R M A N U A L
Email-to-SMS (e-2-s) Gateway
05.03.2018 BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Austria • Tel.: +43 (0)2822 33 33 990 •
www.bellequip.at 3
1. Quick start

Insert the SIM-card by pushing the black button (to the right of the sim-slot 1).

Connect the delivered antenna to port "ANT".

Connect the power-supply to port "PWR".

Connect your PC via Ethernet cable on port "ETH0".

Change the network settings on your PC to 192.168.1.2 (255.255.255.0).

The e-2-s gateway can be configured via WEB browser. The web interface can be
accessed via the following access parameters:
Address: http://192.168.1.1
Username: root
Password: root

Immediately change the default password after the first login, due to security reasons!
You can do that in the menu “Administration”  “Change Password”.

Enter the PIN of the SIM-card (in the e-2-
s gateway menu "Configuration“ 
"Mobile
WAN”  “PIN”). If the PIN is disabled, leave the field empty.

If necessary, change the IP-address of the e-2-s gateway according to your local
network (in the e-2-
s gateway menu "Configuration“  "Lan”  ”Primary”).

Choose the right pre-configuration for your use-
case in the menu “Administration” 
“Change Profile”:
o
Profile: Standard (default)
e-2-s gateway works via LAN, without 2G/3G mobile-data-connection. The e-2-s
gateway connects to the POP3 mailbox via the Ethernet/LAN.
o
Profile: Alternative 1
e-2-s gateway works via 2G/3G mobile-connection, without LAN. The e-2-s
gateway connects to the POP3 mailbox via the Mobile Connection of your SIM
card. Attention, data-traffic of your SIM card must be activated.