BELLEDS QLight Скачать руководство пользователя

Страница: 4 / 34

BELLEDS Technologies. ---- Q Station User Guide

- 4 -

1.2 Connection

Make sure the device and the cables are connected correctly.

(Figure 1-2)

1. Plug in Power Adapter to Q Station.

2. Connect the Q Station to the LAN of your Home Router with LAN cable (optional).

(If you want to connect internet wirelessly, please refer to 2.2.3 Internet Connection.)

3. Connect the Audio Cable from your Q Station to the AUX of your stereo or speaker.

4. Make sure the indicator light of Q Station is blinking with red (left) and blue (right).

There’re 2 indicator lights. (Figure 1-3)

a. The left indicator light shows the Q Station status.

If the left indicator light blinks with red color, it shows the Q Station is in good

status.

b. The right indicator light shows the network status.

If it blinks with blue color, it shows you have not connected to internet.

If it stays blue color, no blink, it shows you have connected to internet.

5. Screw-in the Q Bulbs.

6. Match the Q Bulbs with Q Station

a. Light up the 3 Q Bulbs.

b. Press the Match Hole shortly with a needle.

(Figure 1-3)

After about 20 seconds, the 3 Q Bulbs will blink with green color one by one.

(The Q Bulbs blink with green color shows the Q Bulbs have been matched

with Q Station.)

Notice:

If any Q Bulb did not blink with green color (stay at white color), please turn off the

Q Bulb. And then turn on it, press the Match Hole again. Then you will see the Q

Bulb blink with green color.

7. Reset:

If you want to reset Q-station, just press the Reset Hole with a needle for about 10

seconds.

(Figure 1-3)

Until you see the blue light turns red color. Then loose.

Then the Q station has been reset successfully.

Содержание QLight



































Результаты поиска

Содержание QLight

Отзывы:

Похожие инструкции для QLight

Бренды по названию

Популярные бренды

BELLEDS QLight, Руководство пользователя

Результаты поиска

Содержание QLight

Отзывы:

Похожие инструкции для QLight

Бренды по названию

Популярные бренды