BELLEDS Technologies. ---- Q Station User Guide
- 18 -
2. Wireless Mode.
Click
“Internet Connection”
, to enter the screen.
(Figure 2-19)
Notice:
By default, the wireless access is
ON
.
You can click
OFF
to close wireless access.
The page needs some time to search the nearby Wi-Fi SSIDs
.
After a few seconds, it will display the nearby Wi-Fi SSIDs.
(Figure 2-20)
Connect to the nearby Wi-Fi SSID:
a.
Click the SSID
which you want to connect to (e.g. BellTest).
Then it will
pop-up a window
to let you input the password for the SSID.
(Figure 2-21)
b.
Input the password
of the SSID, then
click “OK” (Figure 2-22).
(If you don’t want to connect, then click “Cancel”.)
c. After
25
seconds
(Figure 2-23),
it will scan the SSIDs again
(Figure 2-24).
d. After a few seconds, it displays all the nearby SSIDs again.
You’ll see
“BellTest”
has been connected
(Figure 2-25).
Notice:
Once it is successfully connected to internet, the right indicator light should be a
steady blue color. Otherwise it will be blinking.
Содержание QLight
Страница 5: ...BELLEDS Technologies Q Station User Guide 5 Figure 1 2 Power up Q Station ...
Страница 6: ...BELLEDS Technologies Q Station User Guide 6 Figure 1 3 Two indicator lights and Reset Match holes ...
Страница 26: ...BELLEDS Technologies Q Station User Guide 26 Figure 2 30 Click OK upgrade will proceed ...
Страница 29: ...BELLEDS Technologies Q Station User Guide 29 Figure 2 34 Click OK upgrade will proceed ...
