The
Touch Line
outdoor panels must be kept away from corrosive substances, lime and blows. In case of renovation activities,
the entire surface of the panels will be protected with plastic foil.
For cleaning the glass surfaces, use a clean cloth and a special solution for glass washing.
DO NOT undo the electrical connections of the video door phone installation components.
DO NOT short-circuit the electrical connections of the video door phone installation components.
a.
Warranty is granted according to the current legislation in the buyer's country of residence, based on the purchase
documents.
b.
Warranty is granted for the hidden defects of the components used in production and in case of the system not functioning
according to the present user manual.
WARRANTY IS NOT GRANTED FOR:
c.
Inappropriate installation and use.
d.
Deterioration, intentional blows.
e.
Unauthorized interventions to any of the components of the installation
f.
Theft, fire, natural disasters
g.
Lack of protection of the installation components in case of renovation activities.
6
Maintenance of the video outdoor panels
7
Warranty
EN
EN
EN
10
2.
To delete the RFID access cards from the memory of the panel:
- Long touch the
Fam. 1
key until the acoustic confirmation of the panel with a long beep.
- Short touch the
Fam. 1
key 7 times. The panel issues two short confirmation beeps.
- Immediately after, long touch (2-3 sec.) the
Fam. 1
key. All the codes of the RFID access cards are deleted
permanently. The action is acoustically confirmed by a long beep.
3.
Go to the place where the
SCU
central unit of the installation is mounted. Short press the
PROG
button on the
SCU
.
The Red LED turns off. The installation returns to normal functioning mode.
4.
Optional: From the outdoor panel, check if the old RFID cards grant access. When each RFID card that has
been deleted from the memory is approached to the panel, a low frequency beep will be issued.
