1
2
/92
Die Anlage läuft nicht
(Stromversorgungseinheit
ohne Akku)
Keine Spannung vom
230 V Wechselstrom
Netz.
1
Stromversorgung:
S1:
S2:
PROG
:
Die 10 A Sicherungen im
Sicherungskasten und die 1
und 1,6 A Sicherungen vom
Stromversorgungseingang
werden überprüft.
Überprüfen der
Kabelverbindungen.
Kurzschluss in der
Anlage zw14V
und GND
Die Anlage läuft nicht
(Stromversorgungseinheit
ohne Akku)
2
Stromversorgung:
S1: blinklicht – grün
S2:
PROG
:
Ursachen für den
Kurzschluss finden und
beheben.
Beheben Sie die Ursache
und schalten Sie die Anlage
nochmals ein.
3
Es kann kein RUF
getätigt werden
Stromversorgung:
S1: grün
S2: grün
PROG:
Inneneinheit:
Die Tastatur
funktioniert nicht, man
kann keine Anrufe
entgegennehmen.
Außeneinheit zeigt
eine Fehlermeldung
an.
Anschlußmangel
CD an die
Inneneinheitsleiter oder
Draht CD unterbrochen
bis zu den
Inneneinheitsleitern.
Stellens Sie die nötigen
Anchlüsse her CD an die
Inneneinheit oder es wird
die Kontinuität des CD
Drahtes von der
Stromversorgungseinheit
zu der Inneneinheit
überprüft.
Die Anlage funktioniert
(Stromversorgungseinhe
itmit Akku)
Stromversorgung:
S1: Blinklicht rot –
grün
S2: grün
PROG:
Der Akku wird geladen
5
OK
Die Anlage
funktioniert
(Stromversorgungseinheit
mit Akku)
Defekter Akku oder er
ist leer.
6
Tauchen Sie den Akku aus
Stromversorgung:
S1
: Blinklicht rot –
grün
S2: grün
PROG:
Akkustisches Signal
Stromversorgung:
S1: grün
S2: grün
PROG:
blinklicht – rot
Inneneinheit:
Die Tastatur
funktioniert nicht,
man kann keine
Anrufe
entgegennehmen.
Außeneinheit zeigt
eine Fehlermeldung
an
Es kann kein RUF
getätigt werden
Der Kurzschluss wird (ggf.)
entfernt.
Kurzschluss zwischen
dem CD und GND
Anschluss, +14V .
4