2
1.
BEA SMP_QX_E
WARRANTY AND PRODUCT RETURN
BELL Audio Systems warrants all materials, workmanship and proper operation of this product for a period
of two years from the original date of purchase. If any defects are found in the materials or workmanship or
if the product fails to function properly during the applicable warranty period, the owner should inform the
dealer or the distributor, providing receipt or invoice of date of purchase and a detailed description of the
defect(s). This warranty does not extend to damage resulting from improper installation, misuse, neglect or
abuse. BELL will verify damage on returned units. If the unit has been properly used and warranty is still va-
lid, the unit will be replaced or repaired. our company is not responsible for any „direct damage“ or „indirect
damage“ caused by any defective product.
INSTALLATION
Product should be installed abd operated in a professional 19“ standard rack with adequate ventilation.
DISCLAIMER
BELL products have been expressly designed for audio application, with signals in audio range
(20Hz to 20kHz). Our company is not liable for damages caused by lack of maintenance, modification, im
-
proper use or improper installation or by ignoring safety instructions.
BELL reserves the right to change technical specifications at any time without notice.
Getting started
Getting started
- Make all necessary connections from amplifiers / mixer by using high quality balanced audio cables.
- Switch on MAINS (rear panel).
- After switching on the unit, all XLR outputs will be connected via relais
(with short a short delay in order to avoid any harsh audio offset)
- After the switch on procedure, all last used paramaters values will be loaded and ac
tivated.
- If activated, the fade in function will be executed. (horizontal bargraph in LCD display)
- Next, the Main LCD Menu will be shown:
LEVEL A: -90.0dB P:01
LEVEL B: -90.0dB P:01
LEVEL A: -90.0dB P:01
LEVEL B: -90.0dB P:01
