8
1.
BEA SMP_QX_E
SYSTEM UTILITY:
-- Ramp Function --
SYSTEM UTILITY:
-- Ramp Function --
Ramp Function
Ramp : Disable
Ramp Function
Ramp : Disable
PM1
Enter
Enter
ESC (quit)
Default setting of RAMP Function is Disable.
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device‘
In the given example, Ramp Function was changed via PM1 encoder from Disable to Enable.
Possible settings for Ramp Function: Disable / Enable.
The ramp function will help to avoid any harsh audible offset whenever any extreme change of
parameter is executed in one single step via the PC software. (Such abrupt changes are not possible
when using the unit‘s encoder on the front panel)
Example: EQ Gain is changed from +15dB to -15dB (extreme setting...)
The procedure string of the ramp function is:
1) fade out of input signal
2) modification of parameter value
3) fade in of the input signal
Due to the fade-in / fade-out process, the ramp function should likely not be used during life performance.
Ramp Function
Ramp : Enable *
Ramp Function
Ramp : Enable *
Software Version
Version: V1.20
Software Version
Version: V1.20
Enter
ESC (quit)
Shows the loaded software version
Ramp Function
Ramp Function
!
Software Version
Software Version
