6) Tying the guy ropes on
Take the same end and doubling it over create a loop and tie it off. We’ve shown
this below not treaded through the canvas loop on the tent as it’s easier to make
out but you want to tread it through the tent first so you end up with the canvas
loop on the tent being where the thumb is in the right hand image.
7) Tie all the short top of wall guy ropes on right around the tent. Do the same for
medium guy ropes on top of the A frames and half way up roof (Shoes off).
Lastly tie the long guy ropes to the tabs either side of the top cone.
That’s you guy roping done forever.
8) Get the A frames and loosen one of the sides next to the top which means
both of the sides of the A frame can be put next to each other making it much
easier to manoeuvre inside the tent.
Unzip the front door and put the first
A frame in place inside it. Position the
feet of the A frame just off the
groundsheet and then push them
against the side of the groundsheet.
This positions them correctly and
helps stop them sliding out of position.
