3) As this is the first time you’ve put it up
it’s a good idea to put the poles together
and place them on the groundsheet so
you get an idea of how it all goes together
before you put the canvas down.
There are 3 A frames, 1 for the front door
and 1 for each end. The two main poles
connect to the cross bar. (see pic)
4) Once you’ve got that remove the poles and place the canvas on the
groundsheet. Find the front door and then find a front corner. Using the middle
sized pegs peg the loops on the bottom of walls right next to the corresponding
pegs in the groundsheet.
5) Once you have pegged out the whole tent it’s time to attach the guy ropes.
This takes a bit of time but you only do it once. Firstly you need to sort out the
guy ropes into their different sizes. As below you’ll see there three different
lengths, the short ones are for the top of the wall, the middle ones are for the
tops of the A frames and the long ones are for the top of the tent.
