6/16/2017
Knowledge Article
http://belkin.force.com/Articles/articles/en_US/Troubleshooting_and_Tutorials/9342/p?pubstatus=o#Electrical
4/14
Step 5:
If you have a Ground wire (optional), disconnect it from the old
switch and connect it to the green wire on the Wemo Light Switch.
Step 6:
Unscrew the wire nut that is holding together the existing Neutral
wires. Connect the white wire from the Wemo Light Switch to the outlet's
exposed Neutral wires. Securely screw them together inside the wire nut.
IMPORTANT:
Wrap electrical tape around the wire nuts to make sure the
copper conductor is fully concealed.
Step 7:
Screw in the Wemo Light Switch and attach the faceplate. Push
all the wires back into the wall box and try to allow as much space for the
switch as possible. Align the
two
screw terminals and screw in the Wemo
Light Switch. Attach the faceplate.
NOTE:
Belkin discourages using metal faceplates as they may interfere
with your WiFi signal.
